|
|
|
|
|
¤ý 20~30 times more efficient than rotational
barrel abraders.
¤ý No dents or cuts.
¤ý Easy to install.
¤ý Easy to use since there is a door lever for the barrel
and an
electronic brake.
¤ý An inclined type of centrifugal abrader as shown in
Figure2 also
produced.
|
|
|
|
This machine is a high speed abrader, using the centrifugal
force. Four hexagonal or octagonal barrels, attached to the turntable,
are designed to turn in an opposite direction to that of the turntable.
Parts, abrading stones, and water are put in the barrels and the turntable
is gyrated.
Then, the things float, pressing against the farthest inner walls
of those barrels.(See H-1)
When a drawing of a barrel is traced, a matter floats in a high speed,
receiving strong pressures as shown in H-2. and the parts get abraded
in a short time.
This machine can be used as a unit just like an oscillating or magnetic
concentrating machine. |
|
Model/Item |
DHA-30 |
DHA-50 |
DHA-60 |
DHA-80 |
DHA-100 |
DHA-120 |
DHA-160 |
liters |
7.5x4EA |
12.5x4EA |
15x4EA |
20x4EA |
25x4EA |
30x4EA |
40x4EA |
mm |
960x1040 |
1050x1050 |
1070x1070 |
1150x1200 |
1170x1250 |
1230x1350 |
1300x1350 |
mm |
1250 |
1530 |
1550 |
1600 |
1620 |
1640 |
1700 |
R.P.M |
180 |
140 |
140 |
127 |
127 |
120 |
110 |
Electromotor |
2HP |
3HP |
3HP |
5HP |
5HP |
7.5HP |
10HP |
Weight(kg) |
650 |
1,000 |
1,100 |
1,400 |
1,500 |
1,700 |
2,300 |
*Above specifications can be changed without prior
notice, due to product development. |
|